Novel Wideband Transition Between Coplanar Waveguide and Microstrip Line
Novel Wideband Transition Between Coplanar Waveguide and Microstrip Line
复制标题
DOI：
10.1109/tmtt.2010.2050094
复制
发表时间：
2010-07-01
影响因子：
4.3
通讯作者：
Mirshekar-Syahkal, Dariush
中科院分区：
文献类型：
--
作者：
Bulja, Senad;Mirshekar-Syahkal, Dariush
提出了一种用于共面波导与微带线连接的新型宽带垂直过渡结构。这种过渡对于毫米波封装和垂直互连非常有用。它是多层的，部分锥形的，并且仅由一个通孔互连组成。设计了两种不同的过渡。第一过渡允许Z（c）= 50 Ω的CPW连接到Z（c）= 16 Ω的微带线，带宽为10-60 GHz。第二过渡在两个端口处具有相同的特性阻抗Z（c）= 50 Ω。在这种情况下，工作频率为40 MHz至60 GHz。两个过渡的回波损耗在其指示的频率范围内通常低于10 dB，而第一和第二过渡的最大测量插入损耗分别为1.8和2.4 dB。为了提取跃迁的S参数，本文提出了一种基于标准穿透反射线两层定标的穿透线技术。模拟和实验结果，表现出良好的一致性，并进行了讨论。
A novel wideband vertical transition for connecting the coplanar waveguide (CPW) to the microstrip line is proposed. This transition can be very useful for millimeter-wave packaging and vertical interconnects. It is multilayered, partly tapered, and consists of only one via interconnect. Two different transitions are designed. The first transition allows connectivity of a CPW with Z(c) = 50 Omega to a microstrip line with Z(c) = 16 Omega with a bandwidth of 10-60 GHz. The second transition has the same characteristic impedance, Z(c) = 50 Omega, at the two ports. In this case, the operating frequency is from 40 MHz to 60 GHz. The return losses of both transitions are generally lower than 10 dB over their indicated frequency ranges, while the maximum measured insertion losses are 1.8 and 2.4 dB for the first and second transition, respectively. To extract the S-parameters of the transitions, a new thru-line technique, based on the standard thru-reflect-line two-tier calibration is introduced. Simulation and experimental results, showing good agreement, are presented and discussed.