Design and measurements of a permanent magnet Flux-Switching-Machine for industrial applications
Design and measurements of a permanent magnet Flux-Switching-Machine for industrial applications
复制标题
工业应用永磁磁通开关机的设计和测量
DOI：
10.1007/s00502-017-0492-4
复制
发表时间：
2017
期刊：
影响因子：
--
通讯作者：
A. Binder
中科院分区：
文献类型：
--
作者：
M. Lehr;A. Binder
本文综述了永磁励磁开关机的设计、结构和测量。本文介绍的28极三相永磁通磁开关机作为400v Y， 45kw， 1000…3000rpm转速的工业变频驱动，其特点是采用开槽铁磁转子，无绕组，无磁体，12个定子齿圈绕组，定子磁体周向磁化。特别注意的是FSPM的制造，因为它有一个非常简单和坚固的转子，然而，需要一个特殊的定子结构。最后，给出了所设计的FSPM电机的测量结果，并与已建成的具有分段转子表面贴装磁体的相同尺寸和等级的永磁同步电机（PMSM）的测量结果进行了比较。
In this paper the design, the construction and measurements of a permanent magnet excited Flux-Switching-Machine (FSPM) are summarized. The special features of the presented 28-pole, three-phase permanent magnet Flux-Switching-Machine as variable-speed industrial drive for 400 V Y, 45 kW, 1000 … 3000 rpm are a slotted ferromagnetic rotor with no windings and no magnets, twelve stator tooth coil windings and in circumferential direction magnetized stator magnets. Special attention is paid to the manufacturing of the FSPM as it has a very simple and robust rotor, however, requires a special construction for the stator.Finally, measurement results of the designed FSPM machine are shown and compared to measurements of an already built permanent magnet synchronous machine (PMSM) of the same size and rating with segmented rotor surface mounted magnets.
永磁或直流励磁磁通切换电机的设计注意事项
DOI：
10.1109/epe.2013.6634396
发表时间：
2013
期刊：
2013 15th European Conference on Power Electronics and Applications (EPE)
影响因子：
--
作者：
Y. Tang;E. Ilhan;Johannes J. H. Paulides;E. Lomonova
通讯作者：
E. Lomonova
具有任意磁体形状和晶粒取向材料的大型气隙电芯磁通切换电机的研究
DOI：
10.1109/icelmach.2016.7732864
发表时间：
2016
期刊：
2016 XXII International Conference on Electrical Machines (ICEM)
影响因子：
--
作者：
A. Lindner;I. Hahn
通讯作者：
I. Hahn