Influence of VOC structures on sensing property of SmFeO3 semiconductive gas sensor
Influence of VOC structures on sensing property of SmFeO3 semiconductive gas sensor
复制标题
DOI:
10.1016/j.snb.2014.06.031
复制
发表时间:
2014-10-01
影响因子:
8.4
通讯作者:
Nakatani, Mikiya
中科院分区:
文献类型:
--
作者:
Moria, Masami;Itagaki, Yoshiteru;Nakatani, Mikiya
A perovskite-type SmFeO3 oxide, which has a p-type semiconducting feature, was used as a chemo-resistive sensor material for VOC detection. SmFeO3 particles were deposited on a comb-type Pt electrode printed on an alumina substrate. In this study, 15 kinds of VOCs (methanol, ethanol, propanol, butanol, acetic acid, propionic acid, methyl acetate, ethyl acetate, acetone, methylethylketone, benzene, toluene, xylene, ethyl benzene, and chlorobenzene) with concentrations below 10 ppm were examined in the range of 350 and 500 degrees C. The resistance of the sensor increased when the referenced air was contaminated with the VOCs. The sensing behavior was characterized by the relationship, R-voc/R-air = 1 + alpha C-1/m. The observed results suggested the detecting ability of ppb-levels of several VOCs. (C) 2014 Elsevier B.V. All rights reserved.