On temperature modelling and validation for high-speed machining of titanium alloys
On temperature modelling and validation for high-speed machining of titanium alloys
复制标题
DOI：
10.1504/ijmr.2009.026577
复制
发表时间：
2009-06
期刊：
影响因子：
--
通讯作者：
Z. Katz;R. Sonnekus
中科院分区：
文献类型：
--
作者：
Z. Katz;R. Sonnekus
温度值在钛合金的高速加工中至关重要，并定义了这种热主导工艺的可加工性。规定了对以前研究的全面描述。本文提出了一些分析方法的温度计算，这是用来评估的影响，在工艺参数的变化对所产生的温度。实验数据的可能验证被纳入。因此，可以更好地理解钛合金的高速加工，通过介绍一个新开发的模型，能够提供可比的定性数据预测趋势相关的工艺参数的变化和实验验证提供有价值的洞察力，为进一步研究这些合金的高速加工。[收稿日期：2008年10月30日;修订日期：2009年1月12日;接受日期：2009年3月6日]
Temperature values are critical in high-speed machining of titanium alloys and define the machinability of this thermally dominant process. A comprehensive description of previous research is prescribed. The paper suggests some analytical methods for temperature calculations, which are used to evaluate the influence of a variation in the process parameters on the temperature generated. Experimental data for a possible validation is incorporated. The high-speed machining of titanium alloys could therefore be better understood through the presentation of both a new developed model able to provide comparable qualitative data predicting trends related to changes in process parameters and an experimental validation providing valuable insight for further research in high-speed machining of those alloys. [Received 30 October 2008; Revised 12 January 2009; Accepted 6 March 2009]