Effect of Hydrogen Treatment on the Catalytic Activity of Iron Oxide Based Materials Dispersed Over Activated Carbon: Investigations Toward Hydrogen Peroxide Decomposition

Effect of Hydrogen Treatment on the Catalytic Activity of Iron Oxide Based Materials Dispersed Over Activated Carbon: Investigations Toward Hydrogen Peroxide Decomposition
复制标题

DOI:
10.1007/s10562-009-0167-9
复制
发表时间:
2009-09
期刊:
影响因子:
2.8
通讯作者:
C. S. Castro;L. Oliveira;M. C. Guerreiro
C. S. Castro;L. Oliveira;M. C. Guerreiro
中科院分区:
化学4区
文献类型:
--
作者:
C. S. Castro;L. Oliveira;M. C. Guerreiro

文献摘要

被引文献

相似文献

研究了氢处理(400℃/1 h)对分散在活性炭上的氧化铁基材料催化h2o2分解性能的影响。研究人员对两种不同的载体进行了评估:一种是商用活性炭(ACM),另一种是用废咖啡渣生产的活性炭(ACR)。采用XRD、SEM、n2吸附、XPS和TPR对催化剂进行了表征。主要结果表明,形成了具有高表面积(>800 m2g−1)的复合材料,并且氢处理导致了催化活性的显著提高,这可能与氢处理形成的还原铁(Fe2+和Fe0)的作用有关。此外,用ACR制备的催化剂比用ACM制备的催化剂具有更高的活性。
The effect of hydrogen treatment (400 °C/1 h) on the catalytic properties toward H2O2decomposition of iron oxide based materials dispersed over activated carbon were investigated. Two different supports were evaluated: a commercial activated carbon (ACM) and an activated carbon produced from spent coffee grounds (ACR). The catalysts were characterized using XRD, SEM, N2-sorption, XPS and TPR analysis. The main results suggest the formation of composites with high surface area (>800 m2g−1) and the hydrogen treatment resulted in a great increase in the catalytic activity, probably as a function of the reduced iron species (Fe2+and Fe0) formed with the treatment. Moreover, the catalyst prepared with ACR showed to be more active than that prepared from ACM.