Experimental Research on Bonding Intensity of Iron Ores in the Sintering Process
Experimental Research on Bonding Intensity of Iron Ores in the Sintering Process
复制标题
铁矿石烧结过程中粘结强度的实验研究
DOI：
10.4028/www.scientific.net/amr.391-392.60
复制
发表时间：
2011-12
期刊：
影响因子：
--
通讯作者：
Guoliang Zhang
中科院分区：
文献类型：
--
作者：
Fangyi Long;Shengli Wu;Juan Zhu;Yuan Du;Guoliang Zhang
研究了巴西、澳大利亚和南非四种矿石的结合强度，并分析了影响结合强度的因素。结果表明，不同类型矿石的结合强度有明显差异，巴西和南非矿石的结合强度较高，澳大利亚矿石的结合强度较低，有效液体产生的基础是足够的液相流动性和岩心较低的孔隙度;岩心孔隙率和液相流动性指数与结合强度呈负相关。
The bonding intensity of four kinds of ores from Brazil, Australia and South Africa is researched in this study, and the influence factors are analyzed. The results show that, the ores of different types have apparently differences in bonding intensity, ores from Brazil and South Africa have high bonding intensity, while ores from Australia have low bonding intensity; The foundation of generation of effective liquid is adequate liquid phase fluidity and the lower porosity of core ore; The ratio of porosity of core ore and the index of liquid phase fluidity has negative correlation with the bonding intensity.