How to Make Casts of the Burrows of Benthic Animals with Polyester Resin
How to Make Casts of the Burrows of Benthic Animals with Polyester Resin
复制标题
如何用聚酯树脂制作底栖动物洞穴模型
DOI：
10.5179/benthos1990.1990.39_15
复制
发表时间：
1990
期刊：
影响因子：
--
通讯作者：
T. Hamano
中科院分区：
文献类型：
--
作者：
T. Hamano
HAMANO，TATSU0（下关水产大学塔纳海洋生物站）。 1990. 如何用聚酯树脂制作底栖动物洞穴模型。底栖动物研究（Bull.Jap.Assoc.Bethology），39：15-20。聚酯树脂对于研究底栖动物的洞穴非常有用。这里介绍一种制作潮汐和潮下洞穴树脂模型的简单方法。将由塑料软饮料瓶制成的透明宽管插入洞穴开口周围的泥浆表面。将含有促进剂和蜡的透明聚酯树脂与催化剂以0.5-1.0％(v/v)的浓度混合在桶中的聚乙烯袋中，从袋中除去空气并将其开口紧固。然后将树脂从袋子的切角倒入洞穴开口上方的塑料管中，直到洞穴填满。硬化后，可将铸件从底部挖出，既可以对破碎的铸件进行粘接，又可以对多余部分进行修整。
HAMANO, TATSU0 (Tana Marine Biological Station, Shimonoseki University of Fisheries). 1990. How to Make Casts of the Burrows of Benthic Animals with Polyester Resin. Benthos Research (Bull. Jap. Assoc. Benthology), 39: 15-20. Polyester resin is very useful for studying the burrows of benthic animals. A simple method of making resin casts of burrows, both tidal and subtidal, is introduced here. A transparent wide tube made from a plastic, soft drink, bottle is driven into the mud surface surrounding a burrow opening. A clear polyester resin containing accelerator and wax is mixed with catalyzer at a 0.5-1.0 %(v/v) concentration in a polyethylene bag in a pail, air is removed from the bag and its opening is fastened tightly. Then the resin is poured from a cut corner of the bag into the plastic tube over the burrow opening until the burrow is full. After hardening the cast can be dug out from the bottom and both adhesive bonding of broken casts and trimming of extraneous parts can be carried out.