Wettability control of laser textured SiC surfaces using additive elements
Wettability control of laser textured SiC surfaces using additive elements
复制标题
使用添加元素控制激光织构 SiC 表面的润湿性
DOI：
10.1016/j.ceramint.2014.12.146
复制
发表时间：
2015-05-01
影响因子：
5.2
通讯作者：
Li, Meng
中科院分区：
文献类型：
--
作者：
Bai, Shaoxian;Wang, Rong;Li, Meng
研究了通过添加纯元素来控制激光毛化碳化硅陶瓷表面的润湿性。元素C/O/Si/B/Al/Fe与接触角的相关性分析表明，元素C/O/Si/B均与润湿性高度相关。元素Fe/Al与接触角的相关性相对较低。因为元素C/Si是碳化硅材料中的固有元素，所以元素0来自氧化，元素B在烧结过程中与添加剂一起添加。通过控制元素B(C)2015 Elsevier Ltd和Techna Group S.r.l的添加，获得了更亲水的碳化硅表面。版权所有。
Wettability control of laser textured SiC ceramic surfaces through the addition of pure elements was studied in this work. A correlation analysis between the elements C/O/Si/B/Al/Fe and the contact angle demonstrates that elements C/O/Si/B are all highly correlated with the wettability. The correlation of elements Fe/Al with the contact angle is relatively lower. Because elements C/Si are inherent elements in a SiC material, element 0 is derived from oxidation, and element B is added along with the additives during the sintering process. A more hydrophilic SiC surface was obtained by controlling the addition of element B. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.