Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques
Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques
复制标题
DOI:
10.1016/s0963-8695(01)00027-5
复制
发表时间:
2002-04-01
影响因子:
4.2
通讯作者:
Reithler, L
中科院分区:
文献类型:
--
作者:
Grondel, S;Delebarre, C;Reithler, L
Statistics show that fatigue crack development comes first and foremost as a damage source in aerospace metallic structures. Currently, widespread methods are available to inspect these structures, but they are quite time-consuming, costly and require the structural system to be idle. Next, attempts to develop damage detection integrated systems are paramount for the safety and cost of such structures. This paper describes an investigation into the feasibility of using an integrated system based on Lamb waves in order to assess the integrity of riveted aluminium, joints during cyclical loading. In this experimental analysis, Lamb waves are excited and received outside the joint area using piezoelectric transducers coupled onto the plates. The detected damage is cracks in joint resulting from fatigue loading. The collected signals on the piezoelectric transducers are analysed using Hilbert transform and time-frequency analysis. It is shown that the final interpretation of Lamb wave analysis may provide a means of sizing the defects and following the crack development. In addition to that, an acoustic emission system is used jointly with the Lamb wave analysis in order to discuss results and damage development. Finally, it is demonstrated that both methods can work together and the results obtained are in good agreement. (C) 2002 Elsevier Science Ltd. All rights reserved.