Ti oxide nano-porous surface structure prepared by dealloying of Ti–Cu amorphous alloy
Ti oxide nano-porous surface structure prepared by dealloying of Ti–Cu amorphous alloy
复制标题
DOI：
10.1016/j.elecom.2010.12.025
复制
发表时间：
2011-03
影响因子：
5.4
通讯作者：
Shengli Zhu;Jianan He;Xian-Jin Yang;Z. Cui;Lele Pi
中科院分区：
文献类型：
--
作者：
Shengli Zhu;Jianan He;Xian-Jin Yang;Z. Cui;Lele Pi
采用去合金化的方法在Ti-Cu非晶合金表面制备了Ti氧化物纳米多孔结构。研究了硝酸浓度、反应温度和负载电压对纳米多孔结构形貌的影响。纳米孔的平均直径约为50 nm，孔壁厚度约为100 nm。纳米多孔表面由Ti和Cu的氧化物组成。
We synthesized Ti oxide nano-porous structure on the surface of Ti–Cu amorphous alloy in a HNO3solution using a dealloying method. The influences of HNO3concentration, reaction temperature and load voltage on the morphology of the nano-porous structure were investigated. The mean diameter of nano pores was about 50nm and the thickness of pore walls is about 100nm. The nano-porous surface was composed of Ti and Cu oxides.