Reducing the energy capacity of the cutting of stem fodder
Reducing the energy capacity of the cutting of stem fodder
复制标题
降低茎秆饲料切割的能量容量
DOI：
10.1088/1757-899x/883/1/012155
复制
发表时间：
2020
期刊：
影响因子：
--
通讯作者：
A. Bozorboev
中科院分区：
文献类型：
--
作者：
D. Alijanov;S. Abdurokhmonov;Y. Jumatov;A. Bozorboev
本文对不同类型的饲料加工进行了效率分析，目的是减少秸秆作物切割时的能耗，建立合适的切割单元，并对矩形刀具切割的能耗进行了评估，得出了切割强度变化的公式，对不同尺寸的预弯秸秆进行了换刀切割。折边工作的理论研究结果，上部纤维的拉应力，刀刃上的应力是破坏纤维所必需的。在刀具材料的切割过程中使用预弯，与切削功相比，减少了切削功201.12 N cm，这与切削290N cm相比，降低了35.05%的切割性能。
In the paper provided efficiency analysis different types of feed processing with purpose decreasing energy use in cutting stalk crops and creating appropriate cutting units, also study results in assescment energy use in cutting with a rectangular knife and received formulation cutting strength change, the results of a change of knife for case in cutting of prebend stalk of various sizes. Results of theoretical research of catting work, the tensile stress of the upper fiber, stresses on the blade of the knife which is necessary for the destruction of the fiber. The use of pre-bending during the cutting of cutter material reduces the cutting work in comparison with the cutting work is 201.12 N cm this is compared to the chopping 290 N cm reduces cutting performance by 35.05 percent.