CO2 recovery from flue gas by PSA process using activated carbon
CO2 recovery from flue gas by PSA process using activated carbon
复制标题
DOI：
10.1007/bf02698463
复制
发表时间：
2001-03
影响因子：
2.7
通讯作者：
B. Na;Kee-Kahb Koo;Heemoon Eum;Hwaung Lee;H. Song
中科院分区：
文献类型：
--
作者：
B. Na;Kee-Kahb Koo;Heemoon Eum;Hwaung Lee;H. Song
An experimental study was performed for the recovery of CO2from flue gas of the electric power plant by pressure swing adsorption process. Activated carbon was used as an adsorbent. The equilibrium adsorption isotherms of pure component and breakthrough curves of their mixture (CO2: N2: O2=17 : 79 : 4 vol%) were measured. Pressure equalization step and product purge step were added to basic 4-step PSA for the recovery of strong adsorbates. Through investigation of the effects of each step and total feed rate, highly concentrated CO2could be obtained by increasing the adsorption time, product purge time, and evacuation time simultaneously with full pressure-equalization. Based on the basic results, the 3-bed, 8-step PSA cycle with the pressure equalization and product purge step was organized. Maximum product purity of CO2was 99.8% and recovery was 34%.
