Geotechnical Engineering Circular No. 12 – Volume IIDesign and Construction of Driven Pile Foundations
Geotechnical Engineering Circular No. 12 – Volume IIDesign and Construction of Driven Pile Foundations
复制标题
岩土工程通告第12号——第二卷打入桩基础的设计与施工
DOI：
--
复制
发表时间：
2016
期刊：
影响因子：
--
通讯作者：
M. Becker
中科院分区：
文献类型：
--
作者：
P. Hannigan;F. Rausche;G. Likins;B. Robinson;M. Becker
本文介绍了公路结构打入桩基础的分析、设计和施工。本文件更新并取代了FHWA NHI-05-042和FHWA NHI-05-043作为联邦公路管理局（FHWA）关于打入桩基础的主要指导和参考文件。该手册涉及设计方面，包括地下勘探，实验室测试，桩选择，岩土和结构极限状态方面，以及技术规范。施工方面包括静荷载试验、动荷载试验、快速荷载试验、波动方程分析、动力公式和打桩准则的制定，以及打桩设备、打桩附件和桩安装检查的监测。一步一步的程序包括大多数分析程序和设计示例。本卷涉及静载测试，动态测试和信号匹配，快速负载测试，波动方程分析，动态公式，合同文件，打桩设备，桩附件，驾驶标准和施工监测。
This document presents information on the analysis, design, and construction of driven pile foundations for highway structures. This document updates and replaces FHWA NHI-05-042 and FHWA NHI-05-043 as the primary Federal Highway Administration (FHWA) guidance and reference document on driven pile foundations. The manual addresses design aspects including subsurface exploration, laboratory testing, pile selection, aspects of geotechnical and structural limit states, as well as technical specifications. Construction aspects including static load tests, dynamic tests, rapid load tests, wave equation analyses, dynamic formulas and development of driving criteria, as well as pile driving equipment, pile driving accessories, and monitoring of pile installation inspection are also covered. Step by step procedures are included for most analysis procedures and design examples. This volume addresses static load tests, dynamic testing and signal matching, rapid load testing, wave equation analysis, dynamic formulas, contract documents, pile driving equipment, pile accessories, driving criteria, and construction monitoring.