Transport properties of rapid solidified FeSiMnCu thermoelectric alloys

Transport properties of rapid solidified FeSiMnCu thermoelectric alloys
复制标题

DOI:
10.1016/s0925-8388(00)00808-2
复制
发表时间:
2000-06
影响因子:
6.2
通讯作者:
X. Zhao;T. Zhu;Shan-shan Hu;Beizhi Zhou;Z. Wu
X. Zhao;T. Zhu;Shan-shan Hu;Beizhi Zhou;Z. Wu
中科院分区:
材料科学2区
文献类型:
--
作者:
X. Zhao;T. Zhu;Shan-shan Hu;Beizhi Zhou;Z. Wu

文献摘要

被引文献

相似文献

采用快速凝固技术制备了掺锰和掺铜的FeSi2和Fe2Si5合金。X射线衍射分析表明,铸态FeSi2合金由α-Fe2Si5和ε-FeSi相组成,而铸态Fe2Si5合金中只有α-Fe2Si5相。两种合金在铸态组织中均未发现半导体相β-FeSi2,但在800°C热处理21h后获得了半导体相。结果表明,当β-FeSi2相中的硅含量超过化学计量比时,过量的硅可以改善材料的输运性能。
Manganese and cooper doped FeSi2and Fe2Si5alloys were prepared by a rapid solidification technique. X-ray diffraction analysis showed that the as-solidified FeSi2alloy is composed of α-Fe2Si5and ε-FeSi phases, while only the α-Fe2Si5phase exists in the as-solidified Fe2Si5alloy. The semiconducting phase β-FeSi2has not been found in the as-solidified structures but was obtained after annealing for 21 h at 800°C for both alloys. It was found that the excess silicon over the stoichiometric silicon content of the β-FeSi2phase could improve the transport properties of the materials.