Monolithic carbon for sorption refrigeration and heat pump applications
Monolithic carbon for sorption refrigeration and heat pump applications
复制标题
DOI：
10.1016/s1359-4311(00)00030-2
复制
发表时间：
2001
影响因子：
6.4
通讯作者：
Z. Tamainot-Telto;R. E. Critoph
中科院分区：
文献类型：
--
作者：
Z. Tamainot-Telto;R. E. Critoph
研究了两种整体式活性炭的热物理性质（有效导热系数 k、渗透率 K、孔隙率 x 和有效比热 C），旨在为以氨为制冷剂的吸附式制冷系统和热泵设计高性能发生器。本文主要关注实验过程和结果。使用测试样品之一获得的典型值是：热导率 = 0.44 W m−1K−1，极限浓度 = 0.36 kg NH3kg−1 碳和碳比热 = 1080 J kg−1K−1（100°C 时）。渗透率结果具有高度各向异性。
The thermophysical properties (effective thermal conductivity k, permeability K, porosity x and effective specific heat C) of two types of monolithic activated carbons are investigated with the intention of designing a high performance generator for sorption refrigeration systems and heat pumps using ammonia as refrigerant. This paper is mainly focused on the experimental procedures and results. Typical values obtained with one of the samples tested are: thermal conductivity = 0.44 W m−1K−1, limiting concentration = 0.36 kg NH3kg−1Carbon and carbon specific heat = 1080 J kg−1K−1at 100°C. The permeability results are highly anisotropic.