Energy Savings Using D-STATCOM Placement in Radial Distribution System☆
Energy Savings Using D-STATCOM Placement in Radial Distribution System☆
复制标题
通过在径向配电系统中放置 D-STATCOM 实现节能☆
DOI：
10.1016/j.procs.2015.10.100
复制
发表时间：
2015
期刊：
影响因子：
--
通讯作者：
Ashwani Kumar
中科院分区：
文献类型：
--
作者：
A. Gupta;Ashwani Kumar
本文确定了径向配电网 D-STATCOM 的最佳位置和尺寸，以减少损耗、改善电压分布和整体节能。本文的主要贡献是：（i）使用电压稳定性指数和功率损耗指数方法比较径向配电网的 D-STATCOM 配置（ii）通过径向配电系统的变分技术计算 D-STATCOM 尺寸，（iii）D-STATCOM 布置的功率损耗降低百分比。根据功率损耗的减少，确定了节能效果。所提出的方法在 IEEE 33 总线径向分布系统中的 D-STATCOM 分配上进行了测试。结果表明，损耗显着降低，电压曲线得到改善。
In this paper optimal location and size of D-STATCOM is determined for radial distribution networks for loss reduction, improvement of voltage profile and overall energy saving. The main contribution of the paper is: (i) Comparison of D-STATCOM allocation for radial distribution network using voltage stability index and power loss index approach (ii) D-STATCOM size calculation by variational technique for radial distribution system, (iii) percentage reduction in power losses with D-STATCOM placement. Based on the reduction in the power losses, the energy savings have been determined. The proposed method is tested for D-STATCOM allocation in IEEE 33-bus radial distribution systems. Results show the considerable reduction in losses and improvement in voltage profile.