Spinal ligament transducer based on a hall effect sensor.
Spinal ligament transducer based on a hall effect sensor.
复制标题
基于霍尔效应传感器的脊柱韧带传感器。
DOI：
10.1016/s0021-9290(96)00137-6
复制
发表时间：
1997
影响因子：
2.4
通讯作者：
M. E. Macias
中科院分区：
文献类型：
--
作者：
J. Cholewicki;M. Panjabi;K. Nibu;M. E. Macias
脊髓韧带换能器（SLT）被开发用于测量在尸体脊柱标本模拟鞭打损伤时的原位脊髓韧带伸长。SLT被设计用于固定在两根k -丝上，这些k -丝在韧带起始点和插入点附近钻入骨中。该传感器成本低，能够测量k线之间的线性距离，范围为4-12 mm，均方根（RMS）精度为0.025 mm。
A spinal ligament transducer (SLT) was developed to measure in situ spinal ligament elongation during the simulation of whiplash trauma with a cadaverie spine specimen. The SLT was designed to be affixed to two K-wires drilled into the bone at the approximate points of ligament origin and insertion. The transducer is low cost and is capable of measuring the linear distance between the K-wires in the range 4–12 mm with the root mean square (RMS) accuracy of 0.025 mm.
影响因子：
2.4
作者：
Weinhoffer,SL;Barnes,SZ;Berme,N
通讯作者：
Berme,N