Design of Multidirectional Parity Code Using Hamming Code Technique for Error Detection and Correction ENGINEERING
Design of Multidirectional Parity Code Using Hamming Code Technique for Error Detection and Correction ENGINEERING
复制标题
利用汉明码技术进行错误检测与纠错工程的多向奇偶校验码设计
DOI:
10.15373/22501991/may2014/27
复制
发表时间:
2012
期刊:
影响因子:
--
通讯作者:
A. Udawat
中科院分区:
文献类型:
--
作者:
V. Badole;A. Udawat
Bit Overhead (BO), Code rate (R), Forward error correction (FEC), Error detection, Error correc- tion, Redundant bit. ABSTRACT In data communication system reliability and efficiency of data transmission are important issues. Reliability of data transmission is improved by channel coding which employs forward error correction (FEC) techniques. Forward error correction techniques are used to detect and correct the errors in data using check bits also known as redundant bits. These redundant bits are generated from the data and sent with data for detection and correction of error in data. When data with redundant bits is transmitted through noisy channel noise may corrupt data as well as redundant bits appended with data. If redundant bits are also corrupted by noise then FEC cannot detect and correct error in data. The proposed error detection and correction technique uses multidirectional parity code to detect and correct error in data part and Hamming code for detection and correction of error in multidirectional parity check bits or redundant bits. This technique is a combination of multidirectional parity code and Hamming code which can detect and correct burst error. The design of encoder and decoder for multidirectional parity code with Hamming code has been realized using MATLAB.