A step-by-step data processing guideline for load model development based on field measurements
A step-by-step data processing guideline for load model development based on field measurements
复制标题
基于现场测量的负载模型开发的分步数据处理指南
DOI：
--
复制
发表时间：
2015
期刊：
影响因子：
--
通讯作者：
V. Turnham
中科院分区：
文献类型：
--
作者：
K. Hasan;J. Milanović;P. Turner;V. Turnham
负荷建模吸引了新的兴趣，这些天在维持高峰负荷条件，提供新类型的负荷和容纳更多的可再生能源发电到电网。本文介绍了11kV和6.6kV两级综合负荷模型的真实的测量数据采集和逐步信号处理。在分析真实的测量数据的挑战突出和问题，以改善基于测量的负荷建模进行了讨论。负荷模型在15个变电站从英国配电网随后的模型参数。这些负荷模型将提供对测量站点和相关上下游变电站的操作灵活性、网络弹性和管理要求的深入了解。
Load modelling attracts renewed interests these days in maintaining peak load conditions, supplying new types of loads and accommodating more renewable generation into electricity networks. This work describes real measurement data acquisition and step-by-step signal processing for developing aggregate load models at 11kV and 6.6kV level. Challenges in analyzing real measurement data are highlighted and issues to improve measurement-based load modelling are discussed. Load models at 15 substations from a UK distribution network are presented with subsequent model parameters. These load models will provide an insight to the operational flexibility, network resilience and management requirements of the measurement sites and related up-and-downstream substations.