Printed inverted L antenna on dielectric substrate

Printed inverted L antenna on dielectric substrate
复制标题

介电基板上印刷倒 L 型天线

DOI:
10.1109/atc.2014.7043456
复制
发表时间:
2014
期刊:
International Conference on Autonomic and Trusted Computing
影响因子:
--
通讯作者:
T. Kida
T. Kida
中科院分区:
--
文献类型:
--
作者:
M. Taguchi;T. Kida

文献摘要

被引文献

相似文献

提出了一种介质基片上的印刷倒L天线,并进行了数值分析。该天线由共面波导构成。当天线尺寸为16 mm × 43 mm × 2.4 mm时,在2.39 ~ 2.51 GHz范围内,S11小于-10 dB。在该天线中,由于接地平面的尺寸小,所以方向性变为3.4dBi。当天线尺寸为28 mm × 39 mm × 2.4 mm时,在2.43 ~ 2.47 GHz范围内,S11小于-10 dB。方向性变为4.42 dBi。
The printed inverted L antenna on a dielectric substrate is proposed and numerically analyzed. This antenna is composed of the coplanar waveguide. When the size of antenna is 16 mm by 43 mm by 2.4 mm, the S11 less than -10 dB is satisfied from 2.39 GHz to 2.51 GHz. In this antenna, since the size of ground plane is small, the directivity becomes 3.4 dBi. When the size of antenna is 28 mm by 39 mm by 2.4 mm, S11 less than -10 dB is satisfied from 2.43 GHz to 2.47 GHz. The directivity becomes 4.42 dBi.