Development of the calcium looping CO2 capture technology from lab to pilot scale at IFK, University of Stuttgart
Development of the calcium looping CO2 capture technology from lab to pilot scale at IFK, University of Stuttgart
复制标题
DOI：
10.1016/j.fuel.2014.01.063
复制
发表时间：
2014-07-01
期刊：
影响因子：
7.4
通讯作者：
Scheffknecht, Guenter
中科院分区：
文献类型：
--
作者：
Dieter, Heiko;Bidwe, Ajay R.;Scheffknecht, Guenter
钙环二氧化碳捕集技术在过去10年中取得了巨大的进步，已成为从电厂烟气中高效捕集二氧化碳的一种可行选择。与本·安东尼教授一起，许多团体为欧洲和世界范围内钙循环的成功故事做出了贡献。钙环的开发始于1999年，以工艺思想为指导，从脱硫剂水平的实验室研究开始，包括工艺效率和经济分析在内的可行性研究，第一批电热试验台的工艺示范，最后进入中试规模。受石灰石吸附强化重整(SER)技术的启发，斯图加特大学燃烧与发电厂技术研究所于2003年在燃烧与发电厂技术研究所完成了第一项关于钙循环的工作。从那时起，IFK一直是推动钙环从基础研究走向中试规模成功工艺示范的小组之一。本文将概述IFK在2003-2013年开展的研究工作，并展示不同研究阶段的主要发展步骤和成就。(C)2014爱思唯尔有限公司。保留所有权利。
Calcium Looping CO2 capture technology has made vast progress within the last 10 years and has become a viable option for efficient CO2 capture from power plant flue gases. Along with Prof. Ben Anthony many groups have contributed to the success story of Calcium Looping within Europe and worldwide. Development of Calcium Looping was initiated in the year 1999 with the process idea, and has continuously proceeded, starting from lab investigations at sorbent level, feasibility studies including process efficiency and economic analyses, process demonstration in the first electrically heated test rigs and finally making the step into pilot scale. Inspired by the sorption-enhanced reforming (SER) of biomass using limestone for in situ CO2 capture, the first work on Calcium Looping done at the Institute of Combustion and Power Plant Technology, IFK of the University of Stuttgart was in 2003. From that point IFK has been one of the groups pushing Calcium Looping from basic research towards successful process demonstration at pilot scale. This paper will give an overview over the research work carried out at IFK in the years 2003-2013 and shows the major steps of development and achievements of different research periods. (C) 2014 Elsevier Ltd. All rights reserved.