Incremental Tube Forming
Incremental Tube Forming
复制标题
渐进式管材成型
DOI：
10.1007/978-3-662-46312-3_54
复制
发表时间：
2015
期刊：
影响因子：
--
通讯作者：
Tekkaya
中科院分区：
文献类型：
--
作者：
Becker;Hermes;Tekkaya
渐进式管材成形工艺是一种新型的变截面三维弯管成形方法。与传统的弯曲工艺相比，管弯曲和管旋压工艺的工艺组合导致显著减小的弯曲力矩以及减小的回弹。因此，这种创新的工艺组合特别适合于制造高强度材料以及薄壁管。除了上述工艺现象之外，该工艺允许制造具有不同横截面的管。管的直径以及壁厚可以变化，因此，横截面可以适应在弯曲管状部件的后续使用期间施加的载荷情况。
The incremental tube forming process is an innovative approach to manufacture three-dimensionally bent tubes with varying cross sections. The process combination of a tube bending and a tube spinning process leads to a significantly reduced bending moment as well as to a reduced springback compared to a conventional bending process. Therefore, this innovative process combination is especially suitable for the manufacture of high-strength materials as well as thin-walled tubes. Besides the mentioned process phenomena the process allows the manufacture of tubes with varying cross sections. The diameter as well as the wall thickness of the tube can be varied and, therefore, the cross section can be adapted to the load case applied during the subsequent usage of the bent tubular part.
一种新的弯管方法——“滚弯工艺”的应用
DOI：
--
发表时间：
1988
期刊：
影响因子：
--
作者：
Y. Tozawa;T. Ishikawa
通讯作者：
T. Ishikawa
渐进式管材成型工艺的基础知识
影响因子：
4.1
作者：
Becker;Tekkaya;Kleiner
通讯作者：
Kleiner