Static Analysis on Slewing Bearing with Negative Clearance Based on ANSYS
Static Analysis on Slewing Bearing with Negative Clearance Based on ANSYS
复制标题
基于ANSYS的负间隙回转轴承静力分析
DOI：
10.4028/www.scientific.net/amm.42.196
复制
发表时间：
2010-11
期刊：
影响因子：
--
通讯作者：
中科院分区：
文献类型：
--
作者：
基于有限元分析和ANSYS软件，对具有负间隙的回转支承进行了分析。本文研究了回转支承在不同载荷作用下的应力分布。通过改变滚珠直径来改变间隙，从而得到内/外滚道与滚珠的接触应力与间隙的关系。随后，将基于部分理论模型的计算结果与其他理论模型的计算结果进行对比，验证了有限元法的可靠性
Based on the FEM and the relative software ANSYS, the analysis of slewing bearings with negative clearance was presented. In this paper, the stress distribution of slewing bearings under condition of different loads has been studied. The clearance has been changed by altering the ball diameter, thus the relationship between the contact stress of the inner/outer raceway and balls and the clearance has been received. Subsequently, compared to the calculation results based on some theoretical models from others, the reliability of the FEM can be verified
影响因子：
5.2
作者：
Jose Ignacio Amasorrain;X. Sagartzazu;Jorge Damián
通讯作者：
Jose Ignacio Amasorrain;X. Sagartzazu;Jorge Damián