Application on bending performance of annular concrete-filled steel tube stent

Application on bending performance of annular concrete-filled steel tube stent
复制标题

环形钢管混凝土支架弯曲性能的应用

DOI:
10.1016/j.jcsr.2020.105984
复制
发表时间:
2020-05
影响因子:
4.1
通讯作者:
Zhang Zhenhao
Zhang Zhenhao
中科院分区:
工程技术2区
文献类型:
--
作者:
Zhang Xiaonan;Zhang Yi;Shan Renliang;Bai Yongtao;Zhang Zhenhao

文献摘要

参考文献

相似文献

Concrete filled steel tube (CFST) stent applied in the actual project is composed of four arc CFST arches with casting. By monitoring the uniform loading deformation of CFST arches mounted on the arc middle section and the left-right shoulder section in a CFST stent, a comprehensive analysis method was proposed for the flexural propagation using ABAQUS program for the strain and the ultimate strength capacity of the outer steel pipe and the confined core concrete. The realtime monitoring and experimental results show that, the CFST specimens were damaged under the influence of triple action of pulling, pressing and bending during the process of loading increases. The support resistance capacity of the annular CFST bracing system increases with the slip amount of CFST arches and gathering of the thickness of CFST stent. After reaching the ultimate load, although it leads to concrete volume expansion and then the steel tube drum package, but annular CFST bracing system reduced the bending moment damage deformation and meet the stability requirements of practical deep underground structure., therefore, there is a certain engineering guidance significance to the non-dense pressure construction condition. (C) 2020 Elsevier Ltd. All rights reserved.
DOI: 10.1016/j.conbuildmat.2017.03.040
发表时间: 2017-07-01
影响因子: 7.4
作者:
Chen, Yu;Feng, Ran;Xu, Jie
通讯作者: Xu, Jie
DOI: 10.1016/j.engstruct.2016.12.061
发表时间: 2017-03-15
影响因子: 5.5
作者:
Ekmekyapar, Talha;Al-Eliwi, Baraa J. M.
通讯作者: Al-Eliwi, Baraa J. M.
DOI: 10.1061/(asce)st.1943-541x.0001705
发表时间: 2016-11
影响因子: 4.1
作者:
Liao Fei-Yu;Han Lin-Hai;Tao Zhong;Rasmussen Kim J. R.
通讯作者: Rasmussen Kim J. R.
DOI: 10.1016/j.jcsr.2009.08.002
发表时间: 2010
影响因子: 4.1
作者:
T. Aly;M. Elchalakani;P. Thayalan;I. Patnaikuni
通讯作者: T. Aly;M. Elchalakani;P. Thayalan;I. Patnaikuni
DOI: 10.1016/j.jcsr.2016.12.016
发表时间: 2017-04-01
影响因子: 4.1
作者:
Du, Yansheng;Chen, Zhihua;Xiong, Ming-Xiang
通讯作者: Xiong, Ming-Xiang