Highly Dispersed Copper Oxide Clusters as Active Species in Copper-Ceria Catalyst for Preferential Oxidation of Carbon Monoxide
Highly Dispersed Copper Oxide Clusters as Active Species in Copper-Ceria Catalyst for Preferential Oxidation of Carbon Monoxide
复制标题
高度分散的氧化铜簇作为铜-二氧化铈催化剂中的活性物质用于一氧化碳的优先氧化
DOI：
10.1021/cs5014909
复制
发表时间：
2015-04-01
期刊：
影响因子：
12.9
通讯作者：
Yan, Chun-Hua
中科院分区：
文献类型：
--
作者：
Wang, Wei-Wei;Du, Pei-Pei;Yan, Chun-Hua
Copper-ceria is one of the very active catalysts for the preferential oxidation of carbon monoxide (CO-PROX) reaction, which is also a typical system in which the complexity of copper chemistry is clearly exhibited. In the present manuscript, copper-ceria catalysts with different Cu contents up to 20 wt % supported on CeO2 nanorods were synthesized by a deposition-precipitation (DP) method. The as-prepared samples were characterized by various structural and textural detections including X-ray diffraction (XRD), Vis-Raman, transmission electron microscopy (TEM), ex situ/in situ X-ray absorption fine structure (XAFS), and temperature-programmed reduction by hydrogen (H-2-TPR). It has been confirmed that the highly dispersed copper oxide (CuOx) clusters, as well as the strong interaction of Cu-[O-x]-Ce structure, were the main copper species deposited onto the ceria surface. No separated copper phase was detected for both preoxidized and prereduced samples with the Cu contents up to 10 wt %. The fresh copper-ceria catalysts were pretreated in either O-2- or H-2-atmosphere and then tested for the CO-PROX reaction at a space velocity (SV) of 60 000 mL center dot h(-1.)g(cat)(-1). The prereduced 5 and 10 wt % Cu samples exhibited excellent catalytic performance with high CO conversions (>50%, up to 100%) and O-2 selectivities (>60%, up to 100%) within a wide temperature window of 80-140 degrees C. The in situ XAFS technique was carried out to monitor the structural evolution on the copper-ceria catalysts during the PROX experiments. The X-ray absorption near edge spectra (XANES) profiles, by the aid of linear combination analysis, identified the oxidized Cu(II) were the dominant copper species in both O-2- and H-2-pretreated samples after CO-PROX at 80 degrees C. Furthermore, the extended X-ray absorption fine structure (EXAFS) fitting results, together with the corresponding H-2-TPR data distinctly determined that the highly dispersed CuOx (x = 0.2-0.5) cluster, other than the Cu-[O-x]-Ce (x = 0.7-3.2) structure, were the crucial active species for the studied CO-PROX reaction.
