Influence of fabrication technology on arc erosion of Ag/10SnO(2) electrical contact materials
Influence of fabrication technology on arc erosion of Ag/10SnO(2) electrical contact materials
复制标题
制备工艺对Ag/10SnO2电接触材料电弧侵蚀的影响
DOI：
10.1016/j.jallcom.2018.06.317
复制
发表时间：
2018
影响因子：
6.2
通讯作者：
Weng Wei
中科院分区：
文献类型：
--
作者：
Wu Chunping;Zhao Qian;Li Nana;Wang Haisheng;Yi Danqing;Weng Wei
电接触材料的加工性能和开关特性等与其制备方法密切相关。在这里，我们提出了一项研究，以评估潜在的影响Ag/10 SnO 2电接触材料的制造技术。结果表明，制备工艺对Ag/10 SnO 2电触头材料的电接触物理现象、电弧烧蚀形貌和电弧烧蚀模型有重要影响。容量法测得的质量变化比称重法大0.3765mg。此外，对不同工艺制备的Ag/10 SnO 2电触头材料电弧烧蚀的形成过程和机理进行了探讨。
Electrical contact material's properties such as processability and switching behavior is strongly depend on the fabrication method. Here we present a study for evaluating the potential impact of fabrication technology for Ag/10SnO2electrical contact materials. The result indicated that fabrication technology had an important influence on electrical contact physical phenomena, arc erosion morphology and arc erosion model of Ag/10SnO2electrical contact materials. The mass change measured by volumetric method is 0.3765 mg larger than that of weighing method. In addition, the formation process and mechanism on arc erosion of Ag/10SnO2electrical contact materials fabricated by different technology were discussed.