モジュラー・マルチレベル・カスケードインバータ(MMCI-DSCC)の共通直流リンクに発生するスイッチングリプル電圧の検討

モジュラー・マルチレベル・カスケードインバータ(MMCI-DSCC)の共通直流リンクに発生するスイッチングリプル電圧の検討
复制标题

模块化多电平级联逆变器(MMCI-DSCC)公共直流环节产生的开关纹波电压研究

DOI:
10.1541/ieejias.131.1424
复制
发表时间:
2011
影响因子:
--
通讯作者:
泰文 赤木
泰文 赤木
中科院分区:
--
文献类型:
--
作者:
誠久 萩原;ペン ヒュイ;泰文 赤木

文献摘要

参考文献

相似文献

本文介绍了一种模块化多电平级联逆变器的基础上双星斩波单元(MMCI-DSCC)的中压电机驱动与被动前端。与传统的两电平PWM逆变器不同,由于DSCC本身具有储能元件,因此DSCC可以在没有普通直流链电容的情况下工作。然而,当使用无源前端时,在公共直流链路中会产生一定量的开关纹波电压。本文尝试用薄膜电容和电阻串联组成的直流无源滤波器来衰减开关纹波电压。一个400 V,15千瓦的缩小模型是用来确认本文开发的设计程序的适用性。实验结果表明,采用小容量薄膜电容器可以很好地抑制开关纹波电压。此外,与15 kW的额定功率相比,滤波器的损耗可以忽略不计。
This paper describes a modular multilevel cascade inverter based on double-star chopper-cells (MMCI-DSCC) for a medium-voltage motor drive with a passive front end. Unlike the traditional two-level PWM inverter, the DSCC can operate without common dc-link capacitors because the DSCC itself possesses energy-storage components. However, a certain amount of switching-ripple voltage is generated in the common dc link when a passive front end is utilized. In this paper, the attenuation of the switching-ripple voltage by using a dc passive filter consisting of a series-connected film capacitor and resistor is attempted. A 400-V, 15-kW downscaled model is utilized to confirm the suitability of the design procedure developed in this paper. Experimental results show that the switching-ripple voltage can be attenuated satisfactorily by a small-capacity film capacitor. Moreover, the loss of the filter is negligible compared to the rated power of 15kW.
第一份使用模块化多电平 PWM 逆变器驱动高压电机的报告:使用 400V、15kW 迷你模型进行实验验证
DOI: --
发表时间: 2010
期刊: 電気学会産業応用部門誌
影响因子: --
作者:
萩原誠;西村和敏;赤木泰文
通讯作者: 赤木泰文
DOI: 10.1109/tpel.2010.2042303
发表时间: 2010-02
影响因子: 6.7
作者:
M. Hagiwara;K. Nishimura;H. Akagi
通讯作者: M. Hagiwara;K. Nishimura;H. Akagi