Characteristics of plasma display panel with ridged dielectric and hollow gap between sustain electrodes
Characteristics of plasma display panel with ridged dielectric and hollow gap between sustain electrodes
复制标题
具有脊状电介质和维持电极之间的中空间隙的等离子显示面板的特性
DOI：
10.1063/1.1756694
复制
发表时间：
2004
影响因子：
3.2
通讯作者：
Young
中科院分区：
文献类型：
--
作者：
Mun;Jung;Sie;S. Son;Young
本文提出了一种基于脊状透明介质层和维持电极间长空心间隙的交流等离子体显示面板（AC-PDP）前面板结构。由于维持电极之间的强电场，所建议的结构可以降低发射电压和维持电压，而不是传统的交流- pdp。在450 Torr的气体压力下，在Xe含量为10% ~ 50%的条件下进行了实验，结果表明，当Xe含量为10%时，脊状介质结构的燃烧电压和维持电压分别比传统结构降低了74 V和79 V。此外，在相同的驱动电压下，当Xe含量为50%时，与传统结构相比，该结构的发光效率和亮度分别提高了约50.9%和33%。
This article presents a front panel structure for an alternating current plasma display panel (AC-PDP) based on a ridged transparent dielectric layer and long hollow gap between the sustain electrodes. The suggested structure can reduce a firing voltage and sustain voltage than a conventional AC-PDP due to a strong electric field between the sustain electrodes. Experiments were conducted with various Xe contents from 10% to 50% at a gas pressure of 450 Torr, and the results confirmed that the ridged dielectric structure reduce the firing and sustain voltages by about 74 and 79 V at 10% Xe content than a conventional structure with 10% Xe content, respectively. Also, the proposed structure improve the luminous efficiency and luminance by about 50.9% and 33%, respectively, with a 50% Xe content when compared to a conventional structure with a 10% Xe content at a similar driving voltage.