Combined effects of void shape and void size – oblate spheroidal microvoid embedded in infinite non-linear solid
Combined effects of void shape and void size – oblate spheroidal microvoid embedded in infinite non-linear solid
复制标题
DOI：
10.1016/j.ijplas.2004.05.006
复制
发表时间：
2005-03
影响因子：
9.8
通讯作者：
Zhenhua Li;Minsheng Huang
中科院分区：
文献类型：
--
作者：
Zhenhua Li;Minsheng Huang
A boundary value problem about the macroscopic response of an infinite material block containing an isolated oblate spheroidal microvoid is investigated by using a Ritz procedure. Special attention is paid to the combined effects of void size and shape on the void evolution. A wide range of void aspect ratio is covered to reflect the shape effect, and the Fleck–Hutchinson phenomenological strain gradient plasticity theory is adopted to capture the scale-dependent behavior of matrix material [Adv. Appl. Mech. 33 (1997) 295]. The void size effect comes into play through the characteristic length ratio λ=l/r*, where l is the intrinsic material length on the order of microns and r*the equivalent radius. Based on detailed theoretical analyses and numerous numerical calculations, some interesting results are obtained: (1) the influences of the void size and the void shape on the responses of porous material are coupled together. This coupling mainly depends on the remote stress triaxiality applied. The influence of void shape on the void size effect at lower stress triaxiality level is much more significant than that at higher stress triaxiality level; (2) due to the void size effect, the growth rate of the microvoid can be markedly cut down with the void size decreasing. There exists a void critical radius rc. When the void equivalent radius r is close to or smaller than the critical radius, the growth rate of the void is essentially eliminated. The void critical radius rc, which is insensitive to the initial void shape μ0and the applied remote stress triaxiality Rσ, approximates to the material intrinsic length l1=0.25∼1 μ m associated with the stretch gradient; (3) besides the remote stress triaxiality level and the void initial shape, the void size also has great influences on the evolution of void shape. These results are significant to understand the evolutions of microvoid on the order of micron or sub-micron.
