Plastic Forming of Sandwich Panels and Numerical Analyses of the Forming Processes Based on Elastoplastic Equivalent Model.
Plastic Forming of Sandwich Panels and Numerical Analyses of the Forming Processes Based on Elastoplastic Equivalent Model.
复制标题
DOI：
10.3390/ma14174955
复制
发表时间：
2021-08-30
期刊：
影响因子：
--
通讯作者：
Cai Z
中科院分区：
文献类型：
--
作者：
Zhang Y;Chen Q;Wang M;Zhang X;Cai Z
本文研究了夹芯板的塑性成形问题，提出了一种适用于夹芯板的通用弹塑性等效方法。为了验证等效方法的通用性，根据芯层结构的不同，将双向梯形夹层（BTS）板和泡沫铝夹层（AFS）板的芯层分别等效为正交各向异性和各向同性（特殊正交各向异性）单层板。通过对夹芯板细观模型的有限元数值模拟，建立了等效芯材模型的弹塑性本构关系，进而建立了夹芯板的宏观等效模型。对BTS板和AFS板的细观模型和等效模型进行了塑性成形的有限元数值模拟，并在多点成形试验机上对夹芯板进行了塑性成形试验。结果表明，等效模型与夹层板细观模型在同一位置处截面平均应力的相对误差均在4%以内;与实验结果相比，夹层板等效模型具有较高的成形精度和较小的形状误差，验证了等效方法的高精度和通用性。此外，采用夹层板等效模型有效地减少了数值模拟的计算时间。
This paper studies the plastic forming of sandwich panels and proposes a universal elastoplastic equivalent method suitable for sandwich panels. To verify the generality of the equivalent method, according to the different core structures, the cores of bi-directional trapezoidal sandwich (BTS) panels and aluminum foam sandwich (AFS) panels are equated to orthotropic and isotropic (special orthotropic) single-layer panels respectively. Through the finite element (FE) numerical simulation of the mesoscopic model of the sandwich panel, the elastoplastic constitutive relationship of the equivalent core model is established, and then the macroscopic equivalent model of the sandwich panel is established. The FE numerical simulation of plastic forming was carried out for the mesoscopic model and equivalent model of BTS panel and AFS panel, and plastic forming experiments were conducted for the sandwich panel through a multi-point forming (MPF) test machine. The results show that the relative errors of the section average stress at the same position of the equivalent model and the mesoscopic model of sandwich panels are all within 4%; compared with the experimental results, the equivalent model of the sandwich panel has high forming accuracy and small shape error, which verifies the high accuracy and generality of the equivalent method. Moreover, using the sandwich panel equivalent model effectively reduces the calculation time of the numerical simulation.
登录
查看更多内容
影响因子：
6.3
作者：
Li, MZ;Cai, ZY;Yan, QG
通讯作者：
Yan, QG
影响因子：
2.5
作者：
Martinez, Oscar A.;Sankar, Bhavani V.;Blosser, Max L.
通讯作者：
Blosser, Max L.
DOI：
10.1016/j.cma.2015.07.014
发表时间：
2015-10-01
影响因子：
7.2
作者：
Safaei, Mohsen;Lee, Myoung-Gyu;De Waele, Wim
通讯作者：
De Waele, Wim
DOI：
10.1098/rspa.1948.0045
发表时间：
1948-01-01
影响因子：
--
作者：
HILL, R
通讯作者：
HILL, R
蛋盒型芯三维铝合金夹芯板成形性能的数值与实验研究
DOI：
10.1007/s00170-018-2499-3
发表时间：
2018-10-01
影响因子：
3.4
作者：
Cai, Zhong-Yi;Liang, Xiao-Bo;Zhang, Xi
通讯作者：
Zhang, Xi