The Effect of Rotary-Die Equal-Channel Angular Pressing Process on the Microstructure, the Mechanical and Friction Properties of GW103 Alloy.
The Effect of Rotary-Die Equal-Channel Angular Pressing Process on the Microstructure, the Mechanical and Friction Properties of GW103 Alloy.
复制标题
转模等通道角冲压工艺对GW103合金显微组织、力学及摩擦性能的影响
DOI：
10.3390/ma15249005
复制
发表时间：
2022-12-16
期刊：
影响因子：
--
通讯作者：
中科院分区：
文献类型：
--
作者：
In this study, the effect of rotary-die equal-channel angular pressing (RD-ECAP) on the microstructure and texture evolution of GW103 alloy is studied. RD-ECAP processes were carried out for 1, 4 and 12 passes at 450 °C. The mechanical properties and friction behavior of RD-ECAP-processed Mg-10Gd-3Y (wt%) alloy (GW103) are discussed. The results reveal that the size of dynamic recrystallized grains and second-phase particles are significantly refined to about 1.3 μm and 1 μm, respectively. The texture evolution of the processed samples is studied by X-ray diffraction and electron backscattered diffraction techniques. The multiple texture components formed are not observed after the conventional ECAP process. Moreover, different dynamic recrystallization (DRX) mechanisms are systemically analyzed and discussed in view of the texture evolution of ECAP processed samples. The final textures obtained after 12 passes are identified as two types: The C-texture type induced by continuous and discontinuous DRX, and the random texture components induced by reorientation of the initial <100> fiber. Based on the grain refinement, precipitate strengthening and texture weakening mechanisms, a high-performance ternary alloy of Mg-Gd-Y was firstly obtained through 12 passes RD-ECAP processing, with a combination of high yield strength of 312 MPa and a high ductility of 22%. In addition, the friction behaviors are also studied. The multi-pass-processed samples exhibit a relatively lower friction coefficient under a load of 10 N at room temperature.
登录
查看更多内容
150℃热扭转变形过程中AZ31挤压棒的动态再结晶和晶粒细化
影响因子：
3.5
作者：
Chen, Hongbing;Song, Bo;He, Jiejun
通讯作者：
He, Jiejun
影响因子：
3.4
作者：
Kumar, Deepak;Goel, Saurav;Jain, Jayant
通讯作者：
Jain, Jayant
影响因子：
2.6
作者：
Davis, Casey F.;Griebel, Adam J.;Lowe, Terry C.
通讯作者：
Lowe, Terry C.
影响因子：
6.2
作者：
Elhefnawey, Maged;Shuai, G. L.;Li, L.
通讯作者：
Li, L.
新型挤压剪切工艺实现Mg-10Gd-3Y合金的高强度和高延展性
影响因子：
6.2
作者：
Chen, Cai;Han, Dongsheng;Toth, Laszlo S.
通讯作者：
Toth, Laszlo S.