Investigations of Inducers Operating With High Rotational Speed
Investigations of Inducers Operating With High Rotational Speed
复制标题
高转速诱导器的研究
DOI：
10.1115/1.4041730
复制
发表时间：
2019
影响因子：
2
通讯作者：
M. Böhle
中科院分区：
文献类型：
--
作者：
B. Gwiasda;M. Mohr;M. Böhle
通过计算流体动力学 (CFD) 模拟以及在 18,000rpm 和 24,000rpm 下进行的实验来检查四种不同诱导轮的吸入性能、压力上升和效率。这些研究源于一个研究项目，其中包括建造一个新的测试台，以判断不同诱导轮的设计。该测试台可以以水为工作流体，进行转速高达 40,000rpm、高压范围为 0.1bar 至 40bar 的实验。实验结果用于评估模拟的准确性并更好地理解设计参数。还显示了转速从 18,000 rpm 增加到 24,000 rpm 对性能的影响。
Suction performance, pressure rise, and efficiency for four different inducers are examined with computational fluid dynamics (CFD) simulations and experiments performed with 18,000 rpm and 24,000 rpm. The studies originate from a research project that includes the construction of a new test bench in order to judge the design of the different inducers. This test bench allows to conduct experiments with a rotational speed of up to 40,000 rpm and high pressure ranges from 0.1 bar to 40 bar with water as working fluid. Experimental results are used to evaluate the accuracy of the simulations and to gain a better understanding of the design parameter. The influence of increasing the rotating speed from 18,000 rpm to 24,000 rpm on the performance is also shown.
DOI：
--
发表时间：
2001
期刊：
--
影响因子：
--
作者：
D. Japikse
通讯作者：
D. Japikse