A novel module assembly line using back contact solar cells
A novel module assembly line using back contact solar cells
复制标题
一种采用背接触太阳能电池的新型模块装配线
DOI：
10.1109/pvsc.2008.4922528
复制
发表时间：
2008
期刊：
影响因子：
--
通讯作者：
J. Bakker
中科院分区：
文献类型：
--
作者：
M. Spath;P. D. de Jong;I. Bennett;T. Visser;J. Bakker
非常需要具有成本效益的高吞吐量设备，以将薄且高效的太阳能电池组装成模块。目前，TTA和ECN建立了一条便于背接触太阳能电池的组件组装线。这条全面运行的中试生产线由处理背接触电池模块的专用设备组成，专注于生产4 × 9和高达6 × 10的电池模块。重点介绍了MC 156 × 156 mm ~ 2、厚度仅为130 μm的超薄背接触电池组件的生产。包括每秒1个电池的吞吐率，这比任何现有技术快6-8倍，目标是100 MWp的模块生产能力。第一组模块的处理在工艺可靠性和成品率方面显示出良好的结果。第一个系列的23个模块（4 × 9）的总产量为100%，而其余23个模块中的8个模块的填充系数为74%。
There is a great need for cost-effective high-throughput equipment to assemble thin and high-efficiency solar cells into modules. Presently, a module assembly line facilitating back-contact solar cells is build by TTA and ECN. This fully operational pilotline consisting of dedicated equipment to process back contact cell modules focuses on the production of 4 × 9 and up to 6 × 10 cells modules. The emphasis is on the production of modules with ultra thin back contact cells of mc 156 × 156 mm2 and only 130 μm in thickness. Comprising a throughput rate of 1 cell per second, which is 6–8 times faster than any existing technology, a module production capacity of 100 MWp is targeted for. Processing of the first set of modules shows good results in terms of process reliability and yield. The overall yield for the first series of 23 modules (4 × 9) was 100% while 8 of the remaining 23 modules generated a fill factor of 74%.