Intra-cavity immersion diffuser for low-coherence generation in dye and solid-state lasers
Intra-cavity immersion diffuser for low-coherence generation in dye and solid-state lasers
复制标题
用于染料和固态激光器中低相干性产生的腔内浸入式扩散器
DOI:
10.1007/s00340-022-07951-3
复制
发表时间:
2022
期刊:
影响因子:
--
通讯作者:
I. Tupitsyn
中科院分区:
文献类型:
--
作者:
O. Burdukova;E. Cheshev;A. Koromyslov;V. Petukhov;Y. Senatsky;I. Tupitsyn
A cuvette with a dense immersion mixture of LiF microparticles and isobutyl alcohol was used in resonators of dye and Nd:YAG lasers as a small-angle diffuser to obtain low-coherent generation. Beams with the degree of spatial coherencewere obtained at the output of PM567; Rh101; DCM dye lasers with a cuvette-diffuser under pumping by 532 nm/25 ns single shot pulses, and in Nd:YAG laser with a diffuser under 808 nm QCW LD pumping when controlling the state of immersion in the cuvette. Illustrations of laser beam profiles at changes in the temperature, radiation wavelength or the mixture composition in the cuvette are presented. Temperatures corresponding to the diffuser “initial state” with the maximum level of immersion and cuvette transmission for different laser wavelengths in the visible and near-IR spectral regions were defined. A phenomenological model describing the operation of a laser with a diffuser in the “working state” (low-coherent lasing) is considered. The possibility of use of an immersion diffuser to obtain low-coherence output in dye and solid-state lasers at various wavelengths in the visible and near-IR spectral regions is discussed.