Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow
Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow
复制标题
DOI：
10.1021/i260019a023
复制
发表时间：
1966-07
期刊：
影响因子：
--
通讯作者：
J. C. Chen
中科院分区：
文献类型：
--
作者：
J. C. Chen
T…）。冷却器所需的表面积主要取决于这些过饱和度的比率，因此该比率可以被认为是“性能系数”。在中试工厂经验之前，Ts将是未知的，使得中试工厂冷却器可以仅针对给定的性能系数来设计。作为指导，最大过饱和度通常约为10至2 ℃。用于无机盐溶液。
T¡). The surface area required in the cooler is critically dependent on the ratio of these supersaturations, so that the ratio may be considered a “coefficient of performance.” Prior to pilot plant experience, Ts will be unknown, so that a pilot plant cooler can be designed only for a given coefficient of performance. As a guide, maximum supersaturations are usually about Io to 2 C. for inorganic salt solutions.