Corrosion mitigation coatings for RF sources and components
Corrosion mitigation coatings for RF sources and components
复制标题
射频源和组件的缓蚀涂层
DOI：
10.1109/ivec.2016.7561851
复制
发表时间：
2016
期刊：
影响因子：
--
通讯作者：
G. Parsons
中科院分区：
文献类型：
--
作者：
R. Ives;G. Collins;C. Oldham;E. Stevens;P. S. Williams;M. Mantini;G. Parsons
大多数高功率射频源和组件都需要液体冷却，通常是高纯水。如果水中含有杂质或含氧量不高，铜和相关钎焊合金容易受到腐蚀。不幸的是，在许多地方，包括发展中国家、偏远地区和海军舰艇，并不容易获得高纯度的水。美国海军正在资助开发保护涂层，以减少或消除射频源和螺线管中铜冷却剂通道的腐蚀。本报告将介绍在射频源及相关部件和设备中应用防腐蚀涂层的程序。
Most all high power RF sources and components require liquid cooling, usually high purity water. Copper and associated braze alloys are susceptible to corrosion if the water contains impurities or modest levels of oxygen. Unfortunately, high purity water is not readily available in many locations, including developing countries, remote sites, and naval vessels. The U.S. Navy is funding development of protective coatings to reduce or eliminate corrosion in copper coolant channels in RF sources and solenoids. This presentation will describe procedures for applying corrosion mitigation coatings in RF sources and associated components and equipment.