Copper Distribution between Na2S Bearing Fluxes and Carbon Saturated Iron Melts
Copper Distribution between Na2S Bearing Fluxes and Carbon Saturated Iron Melts
复制标题
Na2S 轴承熔剂与碳饱和铁熔体之间的铜分布
DOI：
10.2355/tetsutohagane1955.74.4_640
复制
发表时间：
1988
影响因子：
0.3
通讯作者：
N. Sano
中科院分区：
文献类型：
--
作者：
T. Imai;N. Sano
结果总结如下。1)NaS_（0.5）-FeS-CuS_（0.5）体系在1200·cm ~（-1）时的分配比Lcu在11 ~ 21.5之间。最大Kcu。当Lcu=17，[%51]=0.01时，95%NaS0.5-5%FeS体系的最佳反应温度为213。2)在含79.9- 88.5%NaS 0.5 +10.7-19.4%FeS+0.55- 0.76%CuS 0.5的熔体中，Kci在1170 - 1325·cm-1范围内随温度的变化可用下列方程表示。
The results are summarized as follows. 1) The distribution ratio Lcu was between 11 and 21.5 for the NaS0.5-FeS-CuS0.5 system at 1 200•Ž. The maximum Kcu. was 213 for the 95%NaS0.5-5%FeS system with Lcu=17 and [%51=0.01. 2) The temperature dependence of Kci, from 1 170•Ž to 1 325•Ž for the melts containing 79.9-88.5%NaS0 .5+10.7-19.4%FeS+0.55-0.76%CuS0.5 can be expressed by the following equation.