Dynamical overlap fermions: Simulation and physics results
Dynamical overlap fermions: Simulation and physics results
复制标题
动态重叠费米子：模拟和物理结果
DOI：
--
复制
发表时间：
2005
期刊：
影响因子：
--
通讯作者：
T. DeGrand
中科院分区：
文献类型：
--
作者：
S. Schaefer;T. DeGrand
当双锁构件（42 a）处于未完全插入状态时，接触部（43 a）从插头壳体（20）突出。在该未完全插入状态下，插头壳体（20）和盖壳体（30）处于彼此暂时锁定之前的位置，并且未插入到插头壳体（20）中的双重锁定构件（42 a）的接触部（43 a）与盖壳体（30）的端部（30 a）接触，因此插头壳体（20）和盖壳体（30）不能被拉到一起。此外，螺栓盒14的端部，其中螺栓12被夹持在插头壳体的孔22中，并且螺栓12被螺栓止动板40保持在插头壳体20中。因此，在处于未完全插入状态时，螺栓（12）保持在未接合状态。
When double-lock member (42a) is in an incompletely inserted state, the contacting part (43a) projects from the plug housing (20). In this incompletely inserted state, the plug housing (20) and cap housing (30) are in a position prior to being tentatively latched to each other, and the contacting part (43a) of the double-lock member (42a), which has not been inserted into the plug housing (20), makes contact with the end (30a) of the cap housing (30), so the drawing together of the plug housing (20) and the cap housing (30) cannot proceed. Also, the end of the bolt case (14) in which the bolt (12) is clasped into the hole (22) of the plug housing, and the bolt (12) is held in the plug housing (20) by the bolt stop plate (40). Therefore, the bolt (12) is held in an unengaged state in the when in the incompletely inserted state.