Microstructure Observation of Weld Interface between 6063 Al alloy and S45C Carbon Steel by Means of Friction Stirring
Microstructure Observation of Weld Interface between 6063 Al alloy and S45C Carbon Steel by Means of Friction Stirring
复制标题
6063铝合金与S45C碳钢焊接界面的搅拌摩擦显微组织观察
DOI：
10.2207/qjjws.25.426
复制
发表时间：
2007
期刊：
影响因子：
--
通讯作者：
M. Fukumoto
中科院分区：
文献类型：
--
作者：
T. Yasui;Y. Shimoda;T. Ishii;M. Tsubaki;M. Fukumoto
- 通过摩擦搅拌焊接异种金属的研究（第2次报告）-由Yasui Toshiaki**、Shimoda Yoichiro*、石井Takayuki*、TSUBAKI Masami** 和FUKUMOTO Masahiro** 通过TEM观察通过摩擦搅拌焊接6063和S45 C之间的界面的显微组织。反应层沿沿着焊接方向和刀片深度方向形成。渗层由Fe 2Al 5和FeAl等金属间化合物组成.其组成因焊接条件而异。当焊接速度为500 mm/min时，界面反应层较薄。当焊接速度为1000 mm/min时，界面呈层状结构。然而，两种焊接界面都具有小于1 μ m的反应层，并且获得了高的焊接接头抗拉强度。
-Study on Welding in Dissimilar Metals by Means of Friction Stirring (2nd Report)-by YASUI Toshiaki**, SHIMODA Yoichiro***, ISHII Takayuki***, TSUBAKI Masami** and FUKUMOTO Masahiro** Microstructure of weld interface between 6063 and S45C by means of friction stirring was observed by TEM. The reaction layer was formed along welding direction and depth direction of tool insert. The layers were composed of various intermetallic compounds such as Fe 2 Al 5 and FeAl. The constitution differed with welding conditions. At 500 mm/min of welding speed, the interface had a thin reaction layer. At 1000 mm/min of welding speed, the interface had layered structure. However, both of the weld interfaces had a reaction layer under 1 µ m and achieved high tensile strength of weld joint.