Influence of Ultrasound on Friction Induced Vibrations during Tightening of Bolted Joints
Influence of Ultrasound on Friction Induced Vibrations during Tightening of Bolted Joints
复制标题
超声波对螺栓接头拧紧过程中摩擦引起的振动的影响
DOI：
10.1002/pamm.201710150
复制
发表时间：
2017
期刊：
影响因子：
--
通讯作者：
Schlattmann
中科院分区：
文献类型：
--
作者：
Baramsky;Seibel;Schlattmann
螺栓接头的组装通常基于这样的假设：接头已按照设计指南的规定进行组装。然而，在拧紧过程中，可能会出现误差，其中一些误差可能与摩擦引起的振动有关。为了改进自动拧紧过程并减少摩擦引起的振动的影响，在螺栓接头的轴承上施加了额外的高频扭矩。这使得拧紧过程中的拧紧效率显着提高，拧紧扭矩更低，预紧力增量也更低。 （© 2017 Wiley‐VCH Verlag GmbH & Co. KGaA，魏因海姆）
The assembly of bolted joints is often based on the assumption that the joint has been assembled as the design guidelines prescribe. However, during the tightening process, errors can occur, some of which can be affiliated with friction‐induced vibrations. In order to improve the automated tightening process and reduce the influence of friction‐induced vibrations, an additional high frequency torque is applied to the bearing of the bolted joint. This leads to a significant increase in tightening efficiency, lower tightening torque, and lower pretension force increments during the tightening process. (© 2017 Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim)
螺栓接头拧紧过程中摩擦引起的振动的建模
DOI：
10.1002/pamm.201610118
发表时间：
2016
期刊：
PAMM
影响因子：
--
作者：
Nicolaj Baramsky;A. Seibel;J. Schlattmann
通讯作者：
J. Schlattmann