3D printed PC/SiOC@Zn hybrid composite as dendrite-free anode for Zn-Ion battery
3D printed PC/SiOC@Zn hybrid composite as dendrite-free anode for Zn-Ion battery
复制标题
DOI：
10.1016/j.nanoen.2022.107505
复制
发表时间：
2022-09-01
期刊：
影响因子：
17.6
通讯作者：
Chen, Zhangwei
中科院分区：
文献类型：
--
作者：
Idrees, Muhammad;Batool, Saima;Chen, Zhangwei
Zinc-ion batteries (ZIBs) have been considered a key competitor in energy storage devices due to their abundant reserves, low cost, and intrinsic safety. However, their uncontrollable dendritic growth and parasitic reactions hampered their commercial rejuvenation. Here, 3D printed electrode with a novel hybrid PC/SiOC composite material is designed to regulate zinc-ion deposition and control dendrites formation. Significantly, the inter-penetrated SiOC network within a porous carbon not only improves conductivity and active sites but also guides the uniform nucleation of Zn2+ in porous carbon voids. With such tuned surface wettability and electronic features, the 3DP-PC/SiOC@Zn anode in half-cell achieves a superior capacity of 99 mAh g(-1) at 0.45 A g(-1), while in the symmetric cell, it demonstrates impressively low and stable voltage polarization at 10 mA cm(-2) for 800 h of operational lifespan, revealing a high Zn plating/stripping process. The 3DP-PC/SiOC@Zn anode coupled with a V2O5/C cathode as a full battery exhibits a high capacity of 67 mAh g-1 at 0.5 A g(-1). The developed electrohealing extends the battery's lifespan to 46 and 23.8 h at 10 and 15 mA cm(-2). This elaborated study introduces a 3DP electrode based on a novel hybrid PC/SiOC composite to develop dendrite-free ZIBs.
