Investigation on the influence of various welding parameters on the arc thermal efficiency of the GTAW process by calorimetric method
Investigation on the influence of various welding parameters on the arc thermal efficiency of the GTAW process by calorimetric method
复制标题
量热法研究不同焊接参数对GTAW工艺电弧热效率的影响
DOI：
10.1007/s12206-014-0736-8
复制
发表时间：
2014
影响因子：
1.6
通讯作者：
J. Martikainen
中科院分区：
文献类型：
--
作者：
M. Nasiri;Masoud Behzadinejad;H. Latifi;J. Martikainen
Arc efficiency of Gas Tungsten Arc Welding (GTAW) was determined by calorimetric method. A water-cooled anode calorimeter was designed and manufactured to measure the arc thermal efficiency, which was determined as a function of current, arc length, polarity and gas flow rate for GTAW of mild steel. With Direct Current Electrode Negative (DCEN) polarity and 5 mm arc length, a thermal efficiency of 67±4% was obtained, which was independent of the welding current. With Direct Current Electrode Positive (DCEP) polarity and 5 mm arc length, arc thermal efficiency was determined as 52±4%. The experimental data show that the arc efficiency decreases from 67% to 58% and 51% as the arc length increases from 5 mm to 11 and 17.5 mm, respectively. The experimental results also show that the arc efficiency is not significantly affected by the shielding gas flow rate.
