Fabrication of single-mode chalcogenide optical fiber

Fabrication of single-mode chalcogenide optical fiber
复制标题

DOI:
10.1109/50.661012
复制
发表时间:
1998-02
影响因子:
4.7
通讯作者:
R. Mossadegh;J. Sanghera;D. Schaafsma;B. Cole;V. Nguyen;R. Miklos;I. Aggarwal
R. Mossadegh;J. Sanghera;D. Schaafsma;B. Cole;V. Nguyen;R. Miklos;I. Aggarwal
中科院分区:
工程技术2区
文献类型:
--
作者:
R. Mossadegh;J. Sanghera;D. Schaafsma;B. Cole;V. Nguyen;R. Miklos;I. Aggarwal

文献摘要

被引文献

相似文献

采用双坩埚技术制造了长长度(>150 m)的单模硫族化物光纤。使用 2.7 /spl mu/m 的 F 中心激光器演示了通过 10 m 连续光纤的单模传输。使用 FTIR 光谱仪和 F 中心激光器通过标准缩减技术测量该光纤的光损耗,获得小于 1 dB/m 的最小损耗。
Long lengths (>150 m) of single-mode chalcogenide optical fiber were fabricated by a double crucible technique. Single-mode transmission through 10 m of continuous fiber was demonstrated using an F-center laser at 2.7 /spl mu/m. The optical loss of this fiber was measured by a standard cutback technique using an FTIR spectrometer and also using an F-center laser, A minimum loss of less than 1 dB/m was obtained.