Electrolyte Jet Machining Using Multiple Nozzles
Electrolyte Jet Machining Using Multiple Nozzles
复制标题
DOI：
10.2526/jseme.40.82
复制
发表时间：
2006
期刊：
影响因子：
--
通讯作者：
T. Ikeda;W. Natsu;M. Kunieda
中科院分区：
文献类型：
--
作者：
T. Ikeda;W. Natsu;M. Kunieda
本研究的目的是利用多个喷嘴来提高电解液喷射加工的效率。在传统的电解液射流加工中，选择性去除是在单个喷嘴的射流作用下发生的。为提高加工效率，提出了由多个简单管状喷嘴组成的多喷嘴结构，并研究了多个射流间的干涉对加工特性的影响。结果表明，采用多喷嘴是提高加工效率和表面粗糙度的有效途径。然而，如果管嘴之间的距离太小，可能会由于相邻电解液射流之间的干扰而降低加工精度。
The purpose of this research is to improve the efficiency of electrolyte jet machining by using multiple nozzles. In conventional electrolyte jet machining, selective removal occurs electrochemically under the jet flow from a single nozzle. The multiple nozzle composed of several simple pipe nozzles was proposed in this study to improve machining efficiency, and influence of the interference between multiple jet flows on machining characteristics were investigated. It was found that use of the multiple nozzle is an effective way of improving both machining efficiency, and surface roughness. However, machining accuracy may deteriorate due to the interference between the adjacent electrolyte jet flows if the distance between the pipe nozzles is too narrow.