Design of Static Parameter Detecting & Measuring System for Gun Tube
Design of Static Parameter Detecting & Measuring System for Gun Tube
复制标题
静态参数检测设计
DOI：
--
复制
发表时间：
2009
期刊：
影响因子：
--
通讯作者：
Duan Xiao
中科院分区：
文献类型：
--
作者：
Duan Xiao
为解决火炮身管静态参数检测系统存在的一些问题，研制了适用于不同火炮身管的发动机通用平台，其测量精度为轴向0.05%以上，圆角0.1°以上。在模块化设计的指导下，设计了双微控制器控制的硬件通用平台和软件通用平台。探伤模块由三个共用平面连接，可检测所有探伤参数，使探伤长度和深度的测量精度达到0.1 mm以上。三个普通平板与内径测量模块连接，使内径所有参数的测量精度均在0.000 2 mm以上。通用平台还可以与其他测量模块连接，以获取身管的其他参数。
In order to solve some problems of static parameter detecting measuring system for gun tube,we invented the engine common flat that adapted to different gun tube with measuring accuracy above 0.05% of axes orientation and above 0.1° of circle orientation. We designed the hardware common flat controlled by double MCU and the software common flat under the guidance of modular design. Three common flats connected with the flaw-detecting module which could detect all parameters of flaw to make the measuring accuracy of flaw's length and depth above 0.1 mm. Three common flats connected with the measuring module of bore size to make the measuring accuracy of all parameter of bore size above 0.000 2 mm. The common flats also can connect with other measuring module to get other parameters of the gun tube.