Novel glass ceramic-type micropattern gas detector with PEG3C
Novel glass ceramic-type micropattern gas detector with PEG3C
复制标题
采用 PEG3C 的新型玻璃陶瓷型微图案气体检测器
DOI：
10.1016/j.nima.2013.08.001
复制
发表时间：
2013
期刊：
影响因子：
--
通讯作者：
F. Tokanai et al.
中科院分区：
文献类型：
--
作者：
土居正明;小西貞則;保科 架風，小西 貞則;F. Tokanai et al.;Sadanori Konishi;Sadanori Konishi;F. Tokanai et al.
研制了一种用于孔式微图案气体探测器（MPGD）的新型玻璃板（GP）。GP的材料是由Hoya Corporation制造的结晶光敏蚀刻玻璃（PEG 3C）。在1个大气压下使用具有Ne基气体混合物的X射线束进行孔型MPGD的基本性能测试。单GP和双GP分别获得了5× 103和6× 104的增益。对于6 keV的X射线，用单个GP获得了17%的能量分辨率。它还表明，有小的充电效应在GP。在本文中，我们报告的特点，新的孔型MPGD与GP制成的PEG 3C。
A new glass plate (GP) has been developed for a hole-type micropattern gas detector (MPGD). The material of the GP is a crystallized photosensitive etching glass (PEG3C) made by Hoya Corporation. A basic performance test of the hole-type MPGD was carried out using an X-ray beam with Ne-based gas mixtures at 1 atm. Gains of up to 5×103and 6×104were obtained using a single and a double GP, respectively. An energy resolution of 17% was obtained for 6 keV X-rays with a single GP. It was also shown that there is little charging-up effect in the GP. In this paper, we report the characteristics of the new hole-type MPGD with a GP made of PEG3C.