Performance modeling and testing on a heat-regenerative adsorptive reversible heat pump
Performance modeling and testing on a heat-regenerative adsorptive reversible heat pump
复制标题
热再生吸附式可逆热泵性能建模与测试
DOI：
10.1016/s1359-4311(01)00082-5
复制
发表时间：
2002
影响因子：
6.4
通讯作者：
Y. Xu
中科院分区：
文献类型：
--
作者：
Y. Gui;Ruzhu Wang;W. Wang;J. Wu;Y. Xu
本文分别从模拟和实验两个角度定义了回热式吸附式可逆式热泵的主要性能指标。以实用的三热源模型为基础，研究了热源温度、送风温度、环境温度、吸附剂金属和热流体与吸附剂的热容比、余热回收结束时的两吸温差等参数对系统性能的影响，以指导系统的优化运行。研究表明，样机性能令人满意，实验结果接近仿真。
In this paper, the main performance indices of a heat-regenerative adsorptive reversible heat pump are defined from the viewpoints of simulation and experiment respectively. Based on the practical three-heat-reservoir model, the influences of various parameters are studied, such as heat source temperature, supply air output temperature, environmental temperature, heat capacity ratio of adsorber metal and thermal fluid to adsorbent and two-adsorber temperature difference at the end of heat recovery etc. It can be used to guide the optimal running of the system. Research indicates that the prototype performance is satisfactory and the experimental result is close to simulation.