Chitosan based fiber-optic Fabry-Perot humidity sensor

Chitosan based fiber-optic Fabry-Perot humidity sensor
复制标题

DOI:
10.1016/j.snb.2012.04.052
复制
发表时间:
2012-07-05
影响因子:
8.4
通讯作者:
Leong, K. C.
Leong, K. C.
中科院分区:
化学1区
文献类型:
--
作者:
Chen, L. H.;Li, T.;Leong, K. C.

文献摘要

被引文献

相似文献

介绍了一种基于法布里-珀罗干涉结构的相对湿度光纤传感器。所提出的光纤传感器是由一层薄的湿敏感天然聚合物壳聚糖功能化,形成一个低细度的法布里-珀罗传感器。本文采用的传感方案是基于壳聚糖传感膜的膨胀效应(膨胀程度随相对湿度的变化而变化),当相对湿度改变时,会引起光路调制。结果表明,该传感器在20%RH ~ 95%RH的相对湿度范围内的灵敏度为0.13 nm/%RH, RH不确定度为+/- 1.68%RH,响应时间为380 ms。(C) 2012 Elsevier B.V.版权所有
A relative humidity fiber sensor based on Fabry-Perot interferometry configuration is presented. The proposed fiber sensor is functionalized with a thin layer of a moisture-sensitive natural polymer chitosan to form a low fineness Fabry-Perot sensor. The sensing scheme used in this work is based on the swelling effect of chitosan sensing film (degree of swelling varies as a function of relative humidity) which will induce optical path modulation when relative humidity is changed. As observed, the proposed sensor exhibits a sensitivity of 0.13 nm/%RH for relative humidity ranging from 20%RH to 95%RH with a RH uncertainty of +/- 1.68%RH and fast response time of 380 ms. (C) 2012 Elsevier B.V. All rights reserved.