Reference Data for the Density and Viscosity of Liquid Cadmium, Cobalt, Gallium, Indium, Mercury, Silicon, Thallium, and Zinc
Reference Data for the Density and Viscosity of Liquid Cadmium, Cobalt, Gallium, Indium, Mercury, Silicon, Thallium, and Zinc
复制标题
DOI：
10.1063/1.4729873
复制
发表时间：
2012-09-01
影响因子：
4.3
通讯作者：
Wakeham, William A.
中科院分区：
文献类型：
--
作者：
Assael, Marc J.;Armyra, Ivi J.;Wakeham, William A.
对液体镉、钴、镓、铟、汞、硅、铊和锌的密度和粘度的实验数据进行了严格的研究，目的是建立一个密度和粘度标准。所有的实验数据已被归类为主要和次要数据，根据测量的质量，所采用的技术和数据的呈现方式，由一系列的标准规定。建议的液体镉，钴，镓，铟，硅，铊和锌的密度的标准参考相关性的特点是在95%的置信水平分别为0.6，2.1，0.4，0.5，2.2，0.9和0.7的百分比偏差。就汞而言，由于密度参考值已经存在，因此没有开展进一步的工作。液体镉、钴、镓、铟、汞、硅、铊和锌的粘度的标准参考相关性的特征在于95%置信水平下的百分比偏差分别为9.4、14.0、13.5、2.1、7.3、15.7、5.1和9.3。(C)2012年美国物理学会。[http：//dx.doi.org/10.1063/1.4729873]
The available experimental data for the density and viscosity of liquid cadmium, cobalt, gallium, indium, mercury, silicon, thallium, and zinc have been critically examined with the intention of establishing both a density and a viscosity standard. All experimental data have been categorized into primary and secondary data according to the quality of measurement, the technique employed and the presentation of the data, as specified by a series of criteria. The proposed standard reference correlations for the density of liquid cadmium, cobalt, gallium, indium, silicon, thallium, and zinc are characterized by percent deviations at the 95% confidence level of 0.6, 2.1, 0.4, 0.5, 2.2, 0.9, and 0.7, respectively. In the case of mercury, since density reference values already exist, no further work was carried out. The standard reference correlations for the viscosity of liquid cadmium, cobalt, gallium, indium, mercury, silicon, thallium, and zinc are characterized by percent deviations at the 95% confidence level of 9.4, 14.0, 13.5, 2.1, 7.3, 15.7, 5.1, and 9.3, respectively. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4729873]