The panoramic camera of the ROSETTA mission: Performances of prototype 3D microcameras
The panoramic camera of the ROSETTA mission: Performances of prototype 3D microcameras
复制标题
DOI：
10.1016/s0273-1177(99)80204-x
复制
发表时间：
1999-01-01
期刊：
影响因子：
--
通讯作者：
Reynaud, JL
中科院分区：
文献类型：
--
作者：
Beauvivre, S;Lamy, P;Reynaud, JL
我们介绍了用3D封装技术制造的微型相机原型机的性能评估，该技术是为罗塞塔彗星任务着陆器的全景相机开发的。测试了两种不同的原型，一种由阿尔卡特制造，另一种由CSEM制造。采用具有冷却功能的特定实验室设置，在-90℃至+20℃的温度范围内进行电气，机械和光度测试。我们的结果表明，光度性能是标称的，并且在此温度范围内不会发生变化。相机的尺寸缩小，与其工作模式相关，导致瞬态热行为，当温度低于-55摄氏度时，不会影响相机的性能。我们表明，这种微型相机适用于像ROSETTA这样的深空任务，只要在电气和机械设计上特别注意。(c) 1999年cospar。Elsevier Science Ltd.出版。
We present the evaluation of the performances of microcameras prototypes manufactured in 3D packaging technology developed for the panoramic camera of the lander for the ROSETTA cometary mission. Two different prototypes were tested, one manufactured by Alcatel and the other by CSEM. A specific laboratory setup with cooling capabilities was implemented to perform electrical, mechanical and photometric tests in the temperature range -90 degrees C to +20 degrees C. Our results show that the photometric performances are nominal and do not change in this temperature range. The reduced size of the camera, associated with its operating mode, leads to a transient thermal behaviour that does not affect the cameras properties when operated at temperatures below -55 degrees C. We show that this kind of miniature camera is suitable to deep space missions like ROSETTA, provided specific cares are taken in the electrical and mechanical designs. (C) 1999 COSPAR. Published by Elsevier Science Ltd.